Tutorial; Exercise 1 - Agilent Technologies Nano Indenter G200 User Manual

Tutorial

Exercise 1

Agilent Nano Indenter G200 User's Guide
There are four exercises in this tutorial. The
modify the default value for an input and see how that input is used in
other calculations
Exercise 2 shows how to create a channel that calculates strain rate,
defined as displacement rate divided by displacement. This exercise also
will explain how to open another previously tested sample and import it
into the modified method.
Exercise 3 details how to import data from a previously tested sample
and analyze the data with this new method and its new calculations.
Exercise 4 outlines how to modify the test flow to change how the
experiment is performed.
Modify the default value for an input and see how that input is used in
other calculations:
Launch NanoSuite, logging in as a user with Creator priveleges.
1
Choose Method > Open Method.
2
Select XP > G-Series CSM Standard Hardness, Modulus, and
3
Tip Cal from the Filename drop-down menu as shown in
Figure D-56.
Figure D-56Open method dialog box
Click OK.
4
NanoSuite Explorer D

Exercise 1

outlines how to
D-46