Agilent Technologies Nano Indenter G200 User Manual page 241

Agilent Nano Indenter G200 User's Guide
Figure 6-31Retrieve Batch File dialog box
Select the batch file to load.
3
Click Open.
4
The batch may have more samples than you want to run.
Delete any samples that you do not want to run:
5
Click on any sample within the batch.
a
Right-click on that highlighted sample.
b
Select Delete once the desired sample is highlighted for removal.
c
Click Run Batch to begin the test.
6
NanoSuite will prompt you to edit the names of each sample in the batch
via the Review Sample Names dialog box as shown in
page 6-23.
Commonly Used Procedures 6
Figure 6-32 on
6-22