Defining A General Batch - Agilent Technologies Nano Indenter G200 User Manual

Defining a General Batch

Agilent Nano Indenter G200 User's Guide
This procedure is for defining a template for a batch, which can be used
over and over again. The template specifies the test method and inputs
used to run the test.
Click the Test tab to reveal the Test page, as shown in
1
Figure 6-12Test tab
Click the Batch Mode icon, shown in
2
Figure 6-13Batch Mode icon
This will open the Batch Configuration window.
Click New Batch in the Batch Configuration window as shown in
3
Figure 6-14 on page 6-9.
Commonly Used Procedures 6
Figure
Figure 6-13.
6-12.
6-8