Agilent Technologies Nano Indenter G200 User Manual page 294

Agilent Nano Indenter G200 User's Guide
In the Sample View Pane, right-click on the project level and select
11
Add X-Y Graph from the resulting pop-up menu, as shown in
Figure 6-101.
Figure 6-101Select Add X-Y Graph from right-click menu
In the Add Graph dialog box
12
Select the desired X axis (such as Displacement Into Surface)
a
from the X Axis drop-down menu.
Select the desired Y axis (such as E IT Channel) from the YI
b
Axis drop-down menu.
Select the samples to be used in the comparison in the Samples
c
list, or
If no samples are selected, then all samples will be included.
d
Click OK.
13
Commonly Used Procedures 6
(Figure 6-102 on page 6-76):
6-75