Tip Menu
Select Tip
Agilent Nano Indenter G200 User's Guide
Shown in
Figure
4-33, the commands in this menu enable you to define
the properties of indenters.
Figure 4-33Tip menu in NanoSuite
This command enables you to select a property set for a tip via the
Select Tip dialog box shown in
Select a property set from the Tip Selection drop-down menu.
1
Click OK to open a confirmation box.
2
Click OK to continue with your selection.
3
NanoSuite will re-analyze the data for the current sample using the new
tip parameters.
Figure 4-34Select Tip dialog box
Figure
4-34.
NanoSuite 4
4-31