Agilent Technologies Nano Indenter G200 User Manual page 161

NanoSuite 4
Crosshair
This toggle command displays or hides the crosshairs on the graph. The
crosshairs follow data points on the graph. The intersection of the
crosshairs is displayed in the status bar as an X value and Y value (the
graph coordinates). You can move the crosshairs either with the
keyboard right and left arrows or, if the tracking is turned on (see the
Tracking command below), with the cursor.
Tracking
This toggle command enables or disables positioning of the crosshairs
via the cursor.
Add
Use this command to add text and/or text plus an arrow to highlight
important features on the graph. When text is added to a graph, the Edit
and Delete commands are added to the right-click menu, which enable
you to edit or delete a comment after right-clicking on it.
Gridlines
This toggle command displays or hides the gridlines in the graph.
Line Display
This command enables you to select the way that the data points are
displayed on the graph: lines only, lines and points, or points only.
Legend
This toggle command displays or hides the legend for the graph.
Filter Graph Data Option
This command enables you to edit the graph based on filtering data from
the active tests: filter graph data, reset graph filter to original unfiltered
data, or filter help.
Filter Graph Data
This command enables you to filter or exclude graph data for post-test
calculations. Using the curser, on the graph draw a box from top corner
to bottom opposite corner around the data points to include. Next select
Filter Graph Data command from the Filter Graph Data option on the
right-click menu to recalculate the Results Panel single-value results
and summary statistics.
Agilent Nano Indenter G200 User's Guide 4-69