Tools Menu; Calibrate - Agilent Technologies Nano Indenter G200 User Manual

Tools Menu

Calibrate...

Agilent Nano Indenter G200 User's Guide
The Tools menu, shown in
microscope-to-indenter calibration, validate methods, and recalculate
samples/tests.
Figure 4-28Tools menu in NanoSuite
The current test is the test that has its number highlighted in the
Panel, such as the highlighted test shown in
number 10 in this example.
Figure 4-29List of current tests in Legend panel
This command should only be used if you have purchased a calibration
kit and are familiar with its use or when required during diagnostics and
troubleshooting with a certified Agilent technician. This command may
be grayed out if the calibration kit is not installed.
Figure 4-28, is used to perform the
Figure
NanoSuite 4
Legend
4-29, indicating test
4-26