Changing The Indenter - Agilent Technologies Nano Indenter G200 User Manual

Changing the Indenter

CAUTION
Agilent Nano Indenter G200 User's Guide
Select Change Indenter Tip from the Tip menu, as shown in
1
Figure 6-35.
Figure 6-35Change Indenter Tip command from Tip menu
The head will park and the sample tray will be moved away from the
head.
When inserting the locking pins into the indenter shaft, use extreme care
to prevent damage.
NanoSuite will open the Change Indenter Tip dialog box
reminding you to insert the two locking pins into the indenter shaft.
Figure 6-36Change Indenter Tip dialog box
Commonly Used Procedures 6
(Figure 6-36),
6-25