Agilent Technologies Nano Indenter G200 User Manual page 54

Agilent Nano Indenter G200 User's Guide
Look at the actual sample in the cabinet to make sure that the sample is
sitting under the microscope. If not, right-click anywhere on the
schematic map and select Initialize from the resulting pop-up menu, as
shown in Figure 2-44. Then repeat
Figure 2-44Select Initialize from right-click menu
Right-click anywhere on the schematic map and select Nano Video
20
HandSet from the resulting pop-up menu, as shown in
Figure 2-45Select Nano Video Handset from right-click menu
As shown in Figure 2-46
21
brightness control and coarse/fine focus controls to lighten the image
and bring it into focus.
Quick Start Guide 2
step 18 and step 19.
on page 2-36, use the microscope
Figure 2-45.
2-35