Meters - Agilent Technologies Nano Indenter G200 User Manual

NanoSuite 4

Meters

Figure 4-67 shows the real-time meters. Real-time meters may be
configured and displayed at the lower portion of the Test page.
Figure 4-67Real-time meters
To configure the meters, right-click on the meter area to reveal the
meters menu as shown in Figure 4-68. The menu includes commands to
zero the channel, configure channels, set the decimal places of the meter
display, change the units displayed, remove meters, add meters, and set
the display properties of the meters.
Figure 4-68Meters right-click menu
Agilent Nano Indenter G200 User's Guide 4-62