Sample Level - Agilent Technologies Nano Indenter G200 User Manual

Sample Level

Agilent Nano Indenter G200 User's Guide
Only one item is available on the Sample level right-click menu:
Add X-Y Graph. This command opens a dialog box to create a graph
that compares multiple tests within a sample, as shown in
Figure 5-18Add Graph dialog box to compare multiple tests
The Add X-Y Graph command invokes the Add Graph dialog box that
is identical to the dialog box for the Add Graph command at the project
level except for the Data Selection
enables you to select tests instead of samples. See
page 5-9 for more information about the settings available in this dialog
box.
Note that if you do not select tests from the Tests list, Analyst will
include all tests in the graph.
Analyst 5
Figure
tab. At the Sample level, this tab
"Edit Graph"
5-18.
on
5-19