Agilent Technologies Nano Indenter G200 User Manual page 60

Quick Start Guide 2
Figure 2-54Review the first test location of Sample dialog box
Leave the cabinet door open so that you may watch as testing proceeds.
Normally, the isolation cabinet should be closed during testing, but for
this part of the tutorial, you may leave it open.
Periodically, NanoSuite will display the message shown in Figure 2-55.
This is normal because the indenter has not yet touched the surface of
the sample.
Figure 2-55NanoSuite message
While the test is running, NanoSuite displays the numerical readouts at
the bottom of the screen, the real-time graph on the right side of the
screen (as shown in Figure 2-56 on page 2-42), and the text below the
real-time graph. The real-time graph displays data as the test is running.
It should take about ten minutes to complete the batch.
Agilent Nano Indenter G200 User's Guide 2-41