Getting Started; Power Up The System - Agilent Technologies Nano Indenter G200 User Manual

Getting Started

Power Up the System

Agilent Nano Indenter G200 User's Guide
Confirm that the controller and the PI Piezo Controller are turned on:
First, turn on the power switch for the controller, as shown in
1
Figure 2-5.
Figure 2-5 Power switch for controller
If NanoVision is installed, turn on all three power switches (OFL1,
2
OFL2, and OFL3) for the PI Piezo Controller, as shown in
Figure 2-6.
Figure 2-6 Power switches for PI Piezo Controller
Quick Start Guide 2
2-8