Agilent Technologies Nano Indenter G200 User Manual page 242

Agilent Nano Indenter G200 User's Guide
Figure 6-32Review Sample Names dialog box
To edit the names:
7
Click each name one at a time to highlight it.
a
Type in a unique name for each sample.
b
Click OK to continue.
c
NanoSuite will prompt you to select the first test site on each sample.
Position the first sample under the microscope:
8
Right-click in the display area of the Review the first test location
a
of Sample dialog box.
Select Nano HandSet from the resulting pop-up menu.
b
In the schematic map, click on the approximate location of the
9
sample.
Right-click anywhere on the schematic map and select Move to
10
Target.
After the microscope icon turns green, right-click anywhere on the
11
schematic map and select Nano Video HandSet for fine positioning.
Click and drag on the image to find a clean location for testing, such
12
as the location shown in
Commonly Used Procedures 6
Figure 6-33 on page 6-24.
6-23