Editing Input Values - Agilent Technologies Nano Indenter G200 User Manual

Editing Input Values

NOT E
Agilent Nano Indenter G200 User's Guide
Certain test inputs control calculations. You can change these inputs
after the test has been completed. NanoSuite will then automatically
recalculate the data for the current test.
Right-click anywhere in the
1
Post-Test from the resulting pop-up menu, as shown in
Figure 6-96Select Inputs Editable Post-Test from right-click menu
Highlight the value of the input that you want to modify, as shown in
2
Figure 6-97.
Figure 6-97Highlight the value to modify
Depending on the input, the value field will be a text box or a
drop-down menu.
Either type in a value or select a value from the drop-down menu.
3
Click anywhere in the Data pane outside the field that you have
4
edited. NanoSuite will automatically recalculate for the current test.
To apply a changed input value to the entire sample, select
5
Recalculate Sample from the Tools menu.
NanoSuite does not automatically save changes to input values. To save
changes to the input values, select Save Sample from the File menu.
Commonly Used Procedures 6
Data Panel and select Inputs Editable
Figure 6-96.
6-72