Quick Start Guide; S Witching To The Dcm Ii Head - Agilent Technologies Nano Indenter G200 User Manual

Quick Start Guide

Switching to the DCM II Head
Agilent Nano Indenter G200 User's Guide
To use the DCM II option, you must switch to the DCM II head in
NanoSuite.
Park the head by choosing System > Displacement Control Panel
1
as shown in Figure B-1.
Figure B-1Select Displacement Control Panel from the System menu
In the Displacement Control Panel dialog box, click Park Head,
2
outlined in red in Figure
Figure B-2Park Head button in Displacement Control Panel dialog box
Dynamic Contact Module II B
B-2.
B-2