Agilent Technologies Nano Indenter G200 User Manual page 355

Agilent Nano Indenter G200 User's Guide
Figure B-18First turn wrench counterclockwise (left) then slowly slide
wrench and guide tool down (right)
The tip floats freely in the micro-socket wrench, so keep the tool in a
vertical orientation (Figure
avoid dropping the tip.
Figure B-19Keep wrench vertical when removing or replacing tip
Use tweezers to remove the tip from, or install the new tip into, the
7
micro-socket wrench.
Dynamic Contact Module II B
B-19) when removing or replacing the tip to
B-13