NanoSuite 4
Figure 4-112Required Inputs View
Inputs Editable Post-Test
As shown in
Figure
4-113, this view shows the input values that
controlled the post-test calculations for the active test.
Figure 4-113Editable Inputs View
When you change the value of a post-test input, the warning box shown
in
Figure 4-114
on page 4-103 informs you that the change applies only
to the active test. To apply the change to all tests, select
Recalculate
Sample
from the
Tools
Menu.
Agilent Nano Indenter G200 User's Guide
4-102