Agilent Technologies Nano Indenter G200 User Manual page 398

NanoSuite Explorer D
Channels Folder Right-Click Menu
In the Configuration view Settings Pane, there is a right-click menu for
the Channels folder, as shown in Figure D-42.
Figure D-42Right-click menu for Channels folder in the Settings pane
Several of these commands are equivalent to those from the
Configuration pane right-click menu:
Add Hardware Channel... and Add Software Channel... are like
Insert Hardware Channel and Insert Software Channel from the
right-click menu in Figure D-13 on page D-13.
Export Order... is the same command as that in the "General Tab" on
page D-25 for Channel Tabs.
Select Find... to open the Find dialog box (Figure D-43) to search for a
term that appears in the display name of a channel. If the Internal Names
checkbox is selected, then the internal names will be searched instead of
the display names.
Figure D-43Find dialog box
The Delete command deletes the selected channel without placing the
channel on the clipboard. The Cut command deletes the selected
channel and places it on the clipboard. The Copy command copies the
selected channel. The Paste command enables you to paste a channel
from the clipboard to the Settings pane. A prompt will ask you for an
internal name for the channel.
Agilent Nano Indenter G200 User's Guide D-33