Output Feature - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

16 Appendix






Font Caching
To ensure hi-speed printing, outline fonts of up to a certain size are cached. Outline fonts are
converted into bitmap data temporarily and then printed. To minimize this processing time,
the processed bitmap data is saved in the memory. This process is called font caching.
The saved bitmap data is deleted when you turn the machine off or reset it. For the PCL
emulation mode, data other than that being processed is not saved.

Output Feature

This section describes the machine's output features. The following two output features are
available:


Outputting a Pending Print Job
The printing of jobs already received by the machine can be prioritized over other jobs.
For information on prioritizing the printing of jobs already received by the machine, refer to "11 Job Status" > "Printing
Pending Jobs" in the User Guide.
Forcible Output in Emulation Mode
In emulation mode, data is not output until a complete page of data or a page-break
command is received. For a USB interface, if printing ends in the middle of a page, the next
data set waits until the time set with [Auto Eject Time] elapses.
In this case, the Forcible Printing feature does not wait for the auto eject time; however,
forcibly prints the data within the machine.
For more information on forcible printing, refer to "11 Job Status" in the User Guide.
For more information on the auto eject time, refer to "Installation When Using USB Port" (P.332).
PCL Emulation Settings
The following table shows the emulation parameters and their values for PCL emulation.
PCL Settings List
16
The following table describes the parameters that can be set with the mode menu.
718
Line Printer
Times Roman
Times Italic
Times Bold
Times Bold Italic
Helvetica
Outputting a Pending Print Job
Forcible Output in Emulation Mode
 ITC Avant Garde Book Oblique
 ITC Avant Garde Demi
ITC Avant Garde Demi Oblique

ITC Zapf Chancery Medium Italic

ITC Zapf Dingbats

OCR-B
