Optional Components - Fuji Xerox ApeosPort-V 7080 Administrator's Manual

Optional Components

The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Product Name
HCF (A4 1 Tray)
HCF (A4 2 Tray)
Simple Catch Tray
Offset Catch Tray
D2 Finisher
US 2/3 Hole Punch Kit for D2
Finisher
D2-Staple-Finisher with
Booklet Maker
D2-Folder Unit
C3 Finisher
C3 Finisher with Booklet
Maker
Punch Unit 2/4H CD1
Punch Unit US 2/3H CD1
Folder Unit CD1
C3 Finisher Staple Unit 65
Sheets
Bypass Tray Kit
Wing Table
Wing Table 2
Attention Light II
*1
Printer Kit
Description
Allows you to load 2000 sheets of papers (when using 80 gsm
paper) in tray.
Allows you to load 2000 × 2 sheets of papers (when using 80 gsm
paper) into the Tray 6 and 7.
This unit allows to eject paper.
This unit allows to eject paper with an offset.
Staples and hole-punches output sheets.
Inserter is installed for loading paper to be used as separators and
covers.
2/3 hole-punches output sheets.
Note • This kit is available only when the D2 Finisher or D2 Finisher
with Booklet Maker is installed.
Staples or hole-punches output. It also folds output in half or
staples folded output.
Inserter is installed for loading paper to be used as separators and
covers.
This unit allows to fold in z-folded or tri-folded output.
Staples and hole-punches output sheets.
Staples or hole-punches output sheets. Also folds output sheets in
half or staples them.
2/4 hole-punches output sheets.
Note • C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit 2/4H CD1 is included when you purchase the C3
Finisher or C3 Finisher with Booklet Maker.
2/3 hole-punches output sheets.
Note • C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit US 2/3H CD1 is included when you purchase the
C3 Finisher or C3 Finisher with Booklet Maker.
Folds output sheets in bi-folded or tri-folded.
Staples output sheets. Up to 65 sheets can be stapled depending
on the type of paper.
An bypass tray that can load 250 sheets of papers.
Note • This kit is available only when the HCF (A4 2 Tray) is installed.
A kit to load the related equipment such as IC Card Reader, or to
secure work space.
You can set the table either on the right or left side of the
document feeder depending on the related equipment.
A kit for an embedded IC Card Reader.
Allows you to know the machine trouble or the completion of copy
or incoming fax jobs, even when the machine is distant from you.
Adds the Print feature to the machine.
Optional Components
16
623