Optional Components - Fuji Xerox ApeosPort-V 5070 Administrator's Manual

16 Appendix

Optional Components

The following table shows the optional components available. To purchase these options,
contact our Customer Support Center.
Exit 2 Tray
Side Tray
Two Tray Module
Tandem Tray Module
Mobile Stand
HCF Kit
Finisher-B1
2/4 Hole Punch Kit for
Finisher-B1
US 2/3 Hole Punch Kit for
Finisher-B1
Booklet Maker Unit for
Finisher-B
C3 Finisher
C3 Finisher with Booklet
Maker
Punch Unit 2/4H CD1
Stamp Kit SP
Accessory Table A
Printer Kit
Adobe PostScript 3 Kit
16
Scanner Kit
External Access Kit
Network Accounting Kit
Fax Kit 2
598
Product Name
*1 Allows you to use the center output tray as two separate trays.
Note
Delivers output face up.
Consists of two trays.
Consists of two trays. Tray 3 can load 870 sheets of paper and
Tray 4 can load 1,130 sheets of paper (when using 80 gsm paper).
Removable stand on which the machine (main unit, Tray 1, and
Tray 2) is installed. Replaceable with Two Tray Module or Tandem
Tray Module.
Allows you to load 2,000 sheets of papers (when using 80 gsm
paper) in tray.
*3 Staples output sheets.
2/4 hole-punches output sheets.
*3
2/3 hole-punches output sheets.
*3
Staples output sheets. Also folds output sheets in half or staples
them.
*3
Staples and hole-punches output sheets.
Staples or hole-punches output sheets. Also folds output sheets in
half or staples them.
2/4 hole-punches output sheets.
Note
Allows you to stamp on a document scanned with the document
feeder when sending a fax.
A kit to load related products.
*1 Adds the Print feature to the machine.
Allows you to use the machine as a PostScript printer. Also enables
printing from Macintosh.
Note
Adds the Scan feature to the machine.
*1
*2 Allows you to link to a remote application through the control
panel.
Allows you to keep track of user accounts via an external
authentication server.
Adds the Fax feature to the machine.
Description
• It cannot be installed when any finisher is installed.
• C3 Finisher or C3 Finisher with Booklet Maker is required.
• Punch Unit 2/4H CD1 is included when you purchase the C3
Finisher or C3 Finisher with Booklet Maker.
1
• The Printer Kit* is required to use this feature.