Trouble During Copying; Unable To Copy - Fuji Xerox DocuCentre-III 2007 Administrator's Manual

14 Problem Solving

Trouble during Copying

This section describes how to solve copy problems.

Unable to Copy

Follow the procedure below if you cannot copy documents.
The document is
not correctly fed
from the
document
feeder.
14
310
Symptom Cause
The document is too small.
The document type is
unsuitable.
The document guides are in
incorrect positions.
Part of a document is
remaining in the document
feeder.
Documents of different
sizes are loaded.
Remedy
The minimum size of the document that
can be loaded on the document feeder is
A5.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
The document feeder does not feed
irregular sized documents, business cards,
transparencies, or thin documents.
In addition, the document feeder does not
feed documents with tags, paper clips, or
tape.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Adjust the document guides to the
document.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Open the document feeder cover, and
remove the piece.
Refer to "Document Jams" (P.417).
When loading documents of different
sizes, be sure to specify [Mixed Sized
Originals]. Otherwise, a paper jam will
occur.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.