Setting The Screen After Auto Clear - Fuji Xerox ApeosPort-V C6676 Administrator's Manual

1 Before Using the Machine
5
Select [Screen Default], and then select
[Change Settings].
Note
6
Select a service you want to display.
Note
1
7
Select [Save].

Setting the Screen After Auto Clear

You can select the screen to be displayed after Auto Clear from [Last Selection Screen] or
[Services Home] can be selected.
For information on Auto Clear, refer to "Auto Clear" (P.158).
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with
the numeric keypad or the keyboard displayed
on the screen, and select [Enter].
When a passcode is required, select [Next] and
enter the system administrator's passcode, and
select [Enter].
Note
3
Select [Tools] on the Services Home screen.
Note
30
• Select [ ] to display the previous screen or
[ ] to display the next screen.
• Select [ ] to display the previous screen or
[ ] to display the next screen.
• The default user ID is "11111".
• The default passcode is "x-admin".
• When the Services Home screen is not
displayed on the touch screen, press the
<Services Home> button.
<Log In/Out> button