When The Printer Is Idle - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

When the Printer Is Idle

1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Vertical Adjustment function.
2. Press Enter, which causes the following Vertical Adjustment screen to display:
Current
vertical
adjustment
3. The Vertical Adjustment can be either increased or decreased in 0.1000"
increments, from a minimum of -1.2700" to a maximum of 1.2700".
4. The Vertical Adjustment can be increased or decreased in 2 different ways:
Enter the change on the numeric keypad and then press Enter.

or
Move the Up or Down triangle (to increase or decrease the Vertical

Adjustment) and then press Enter.
5. Pressing Enter after the change has been made stores the change and returns
the system to the Offline Print menu.
6. Press the ONLINE switch to restart document printing.
Rev: 1
Figure 6-63. Vertical Adjustment screen.
Page 6-82
of 128 pages
Chapter 6: Supervisory Functions
April, 2014