Printer Control Panel; Status Lights - SATO Argox I4 Series User Manual

1 Introduction

1.4 Printer control panel

There are three lights on the front panel - READY, MEDIA and RIBBON. These
indicators display operation status of the printer. Three Buttons – FEED,
PAUSE, CANCEL can control printer simple function.

1.4.1 Status lights

Status lights help you check printer's condition. The following tables show
the status lights and the conditions they indicate.
LCD Display READY
READY ON
PRINT HEAD ON
HEAT
COMMAND ON
ERROR
EEPROM ON
ERROR
MEMORY ON
ERROR
CANCEL ... Blinking ON
MEDIA RIBBON
ON ON
Blinking ON
Blinking Blinking A command error was found while
Blinking Blinking An EEPROM for back-up cannot be
Blinking Blinking
ON
6
Description
In the ready mode
Print head needs to cool down.
checking the command sequence.
read/written properly.
∙ An error has occurred in writing
data into USB memory or flash
memory.
∙ An erase error has occurred in
formatting USB memory or flash
memory.
∙ Saving failed because of the
insufficient capacity of USB
memory or flash memory.
∙ Firmware update has error.
Press CANCEL KEY to interrupt and
delete a print task
Printer lights