Adjusting The Print Position - SATO CT4-LX Operator's Manual

Adjusting the Print Position

Set the [Pitch] in the [Printing] > [Advanced] > [Adjustments] menu to adjust the print position.
• The above base reference position (print position) becomes the stop position when the
sensor type is set to transmissive (Gap).
1. Tap [SETTINGS] on the Home screen or Offline screen.
2. Input the password if it is enabled.
3. Tap [Printing].
4. Tap [Advanced] > [Adjustments] > [Pitch].
370
Adjusting the Print Position