Esc+B Barcode (Ratio 1:3) - SATO S84EX Programming Reference Manual

58.1 Barcode
58.1

ESC+B Barcode (Ratio 1:3)

Barcode (Ratio 1:3）
ESC
Hexadecimal
code
<1B>
16
Initial value Nil
When the power switch is OFF
Valid range and
term of Valid range within item
command
Valid range between item
[Function]
Specifying the barcode of narrow and wide bar width ratio 1:3.
[Format]
<B>abbcccn～n
●Parameter
a[Barcode symbology]
b[Narrow bar width]
c[Height of barcode]
n[Print data]
Barcode symbology (Ratio of module composition may not be available depending on the barcode symbology.)
a Barcode symbology
0 CODABAR (NW-7)
1 CODE39
2 ITF
3 JAN/EAN13
4 JAN/EAN8
5 Industrial 2of5
6 Matrix 2of5
A MSI
C CODE93
E UPC-E
UPC add-on code
F
Bookland
G CODE128
H UPC-A
I GS1-128 (UCC/EAN128)
P Postnet
S USPS code
B Parameter
<42> abbcccn～n
16
The set parameter is not maintained.
The parameter preset will be invalid.
The parameter preset will be invalid.
= Refer to the table below.
= 01 to 36 dots
= 001 to 999 dots
= Data
Set print data including Start/Stop character.
Start/Stop Characters are [A,B,C,D,E,N,T,a,b,c,d,e,n,t]
However, the reading result of [E, N, T, a, b, c, d, e, n, t] will be [D, B, A, A,
B, C, D, D, B, A.]
e.g.) When barcode print data is [123], specify [A123A].
Barcode character pitch is enabled.
Refer to the code list of the CODEBAR for the print data.
Set print data including Start/Stop Character.
Start/Stop Character is [*].
e.g.) When barcode print data is [12345], specify [*12345*].
Barcode character pitch is enabled.
Refer to the code list of the CODE39 for the print data.
Specify print data in even-numbered digit.
If specifying in odd-numbered digit, "0" will be added to the head of print
data.
Refer to the code list of the ITF for the print data.
The barcode will have no guard bar and human readable information.
Refer to the code list of the JAN/EAN13 for the print data.
The barcode will have no guard bar and human readable information.
Refer to the code list of the JAN/EAN8 for the print data.
Barcode character pitch is enabled.
Refer to the code list of the Industrial 2of5 for the print data.
Barcode character pitch is enabled.
Refer to the code list of the Matrix 2of5 for the print data.
Print data can be specified up to 13-digit.
Refer to the code list of the MSI for the print data.
Refer to CODE 93 <BC>.
Specify 6-digit number for print data.
Refer to the code list of the UPC-E for the print data.
Refer to the UPC add-on code/Bookland specification <BF>.
Refer to CODE128 <BG>.
Barcode will have no guide bar and human readable information.
Refer to the code list of the UPC-A for the print data.
Refer to GS1-128(UCC/EAN128)<BI>.
Refer to the Postnet specification <BP>.
Refer to the USPS code specification <BS>.
ESC+B
Descriptions
93
Ratio
1:3
1:3
1:3
Fixed
(11,12, 13
digits)
Fixed
(7,8 digits)
1:3
1:3
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed