Creating Configurations - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Configuration Switchover

Creating Configurations

Proceed as follows:

• Separately for subscribers

• Using the configuration manager

1. Open the page Subscriber (scr) > Properties > Authorisations.

2. In the list field at the top, select the subscriber in question by his name or number.

3. Select or clear the Configuration switching check box.

Creating Configurations

A maximum of ten configurations can be created.

Proceed as follows:

• Using the configuration manager

1. Open the page Time control > Configurations.

3. Enter the name of the configuration in the Configuration name entry field.

4. In the Based on list field, select a template from all configurations created so far.

6. In the Configuration dependent settings column select the check boxes for the

settings that are to be copied from the template.

9. If necessary change the identification number for the configuration in the Identifi-

cation number entry field. Possible entries:

2 to 4 digits

Note: All previously assigned identification numbers can be viewed sorted by

number, name or type under Overviews > Identification number table.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r