Creating Prefixes For Networks Manually For Soft-Lcr 4.0 - Auerswald COMpact 5000 Operation Manual

Functions
LCR

Creating Prefixes for Networks Manually for Soft-LCR 4.0

Proceed as follows:
• Using the configuration manager
1. Open the page Routing > Soft-LCR 4.0 > Networks/LCR import.
2. Click New.
3. Enter a name for identification in the Network name entry field.
4. Click Save.
5. Repeat steps 2 to 4 to create additional entries.
Further steps:
• Create the corresponding prefixes for the networks to complete the tariff groups.
• Enter the tariff information in the LCR tables.
Creating Prefixes for Networks Manually for Soft-LCR 4.0
A prefix contains the prefix or all of the prefixes from the area that should be collected for the
network (e.g., local telephone network, regional network, international network).
Up to 1000 entries (Area codes/Area code ranges and Name) can be created for all networks
in total.
Note: LCR networks and the corresponding LCR prefixes (Area codes/Area
code ranges) can automatically be created based on the local area code
(CREATE LCR NETZWORKS AUTOMATICALLY WITH HELP OF THE
AREA CODE).
Proceed as follows:
• Using the configuration manager
Requirements:
• Configured LCR network
1. Open the page Routing > Soft-LCR 4.0 > Networks/LCR import.
418
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016