Switching The Search For Available Firmware Updates On/Off - Auerswald COMpact 5000 Operation Manual

2. In the Address of the update server entry field under FIRMWARE UPDATE VIA
UPDATE SERVER, enter the address of the update server (www.auerswald-
update.de). Possible entries:
Four blocks with three digits for IPv4 addresses
Eight blocks with four digits or characters for IPv6 addresses

Switching the Search for Available Firmware Updates on/off

If searching for available firmware updates is switched on, the PBX searches the update server
for available firmware updates. Their availability is signalled by a system message when you
log on to the configuration manager (as administrator) or when you open the page Adminis-
tration > Firmware update/restart (as administrator or sub-administrator).
Proceed as follows:
• Using the configuration manager
1. Open the page Settings > Basic settings.
2. Select or clear the Search online for firmware updates check box under
GENERAL.
Requirements to carry out a search:
• PBX connected to broadband Internet access
• Configured address of the update server
• Configured gateway
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Switching the Search for Available Firmware Updates on/off
Service and Maintenance
Firmware Update
753