2. Click Configure in the line of the corresponding network.
3. Click
New.
4. In the Area code/Area code range entry field, enter the corresponding digit
sequence for an area code or area code range.
5. Enter a name for identification in the Name entry field.
6. Click
Save.
7. Repeat steps 3 to 6 to create additional entries.
Further steps:
• Enter the tariff information in the LCR tables.
Creating Tariff Information for Networks for Soft-LCR 4.0
Tariff information determines which providers are used for dialling LCR calls, depending on the
day and hour.
Note:
LCR requires correct system data (Settings > Date/Time of the PBX).
Valid holidays for LCR are to be switched on the PBX calendar Functions >
Calendar.
Proceed as follows:
• Using the configuration manager
Requirements:
• Configured LCR networks
• Holidays configured and enabled for LCR
• Configured LCR providers
1. Open the page Routing > Soft-LCR 4.0 > LCR tables > [Network name].
2. Click
New.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Creating Tariff Information for Networks for Soft-LCR 4.0
Functions
LCR
419