Switching The Call Restrictor (Outgoing) On/Off For Group - Auerswald COMpact 5000 Operation Manual

controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call restrictor
1. Open the page Subscriber (scr.) > Properties > Exchange line settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call restrictor (outgoing) - business and Call restrictor
(outgoing) - private or Call restrictor (outgoing) check boxes.
4. If you have enabled a call restrictor, select the call restrictor you want in the corre-
sponding list fields.

Switching the Call Restrictor (outgoing) On/Off for Group

If a call restrictor (outgoing) is enabled for a group, the group members logged in as outgoing
can not dial the phone numbers entered in the call restrictor irrespective of their exchange line
authorisation.
Proceed as follows:
• Separately for groups
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
Requirements:
• Configured call restrictor
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Call Restrictor (outgoing) – Restricted Numbers
Switching the Call Restrictor (outgoing) On/Off for Group
Functions
499