Creating Providers - Auerswald COMpact 5000 Operation Manual

Functions
LCR

Creating Providers

1. Open the page Routing > Soft-LCR 4.0 > Networks/LCR import.
2. Click Import.
3. Click Browse (this text is dependent on the browser used) under Import networks.
4. Select the configuration file to be imported and click Open (this text is dependent on
the operating system used).
The path and the file are displayed in the entry field.
5. Click Import data.
The configuration data is imported and displayed in the corresponding tables.
Creating Providers
The provider list provides space for up to 50 dial-around providers.
Proceed as follows:
• Using the configuration manager
1. Open the page Routing > Soft-LCR 4.0 > Provider.
2. Click New.
3. In the Provider area code entry field, enter the provider area code without an
exchange line access number.
4. Enter a name in the Provider name entry field.
5. Click Save.
6. Repeat step 2 to 5 to create additional entries.
Further steps:
• Create the networks for the tariff groups.
• Create for the networks the corresponding prefixes to complete the tariff groups.
• Enter the tariff information in the LCR tables.
416
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016