Table of Contents
Advertisement
Note: Up to 40 internal subscribers or groups can be assigned to a group as
members.
Proceed as follows:
• Using the configuration manager
Requirements:
• At least one configured internal group
• Configured internal subscribers
1. Open the page Groups > Basic settings.
2. In the list field at the top, select the group in question by its name or number.
The list of group members is displayed.
3. Click
New.
4. In the from list field under Phone number / Name, select a subscriber or a group.
5. Click
Save.
The new group member is displayed in the list of group members.
6. Repeat step 3 to 5 to select additional group members.
Note: As far as you have consisting phone number ranges, you can enter the
first and the last value under from and until. This way, several groups are
assigned at the same time.
Group Overview
The group overview shows all of the groups already created along with phone numbers and
names as well as the status (incoming) and (outgoing) of the subscribers.
Note:
The overview can be viewed and printed (
manager by opening the page Overviews > Groups.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Internal Telephone Numbers
Print) in the configuration
Settings
Group Overview
589
Advertisement
Table of Contents
