Table of Contents
Advertisement
Opening the Configuration Manager as User
Requirements:
• A PC meeting the minimum requirements (see chapter Important Information > Minimum
Requirements PC)
• An existing Ethernet connection between the PC and the PBX or both the PC and the PBX
on the same network
• Knowledge of the IP address on the PBX
• Configured user password
1. Start a browser (for example, Mozilla Firefox or Google Chrome).
2. Enter the IP address of the PBX in the address field of the browser (for example,
https://192.168.0.240).
3. Enter the internal number of the user and the associated user password.
4. Click OK (this text depends on the browser).
Operating Instructions for the Configuration Manager
The operating instructions for the configuration manager contain the following topics:
• Navigation
• Logging Out
• Entry and Selection Fields
• Creating and Deleting Table Entries
• Symbols and Highlightings
Configuration Manager Navigation
The configuration manager is sub-divided into different areas:
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Introduction to the Configuration Manager
Operating Instructions for the Configuration Manager
Configuration Manager
115
Advertisement
Table of Contents
