Reading The Lcr Configuration For Soft-Lcr 4.0 From The Pbx - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Reading the LCR Configuration for Soft-LCR 4.0 from the PBX

A completely created LCR configuration can be read out of the PBX and saved on the PC.

Proceed as follows:

• Using the configuration manager

1. Open the page Routing > Soft-LCR 4.0 > Networks/LCR import.

The dialogue for downloading the configuration file softlcr.txt.gz appears.

3. Save the configuration file on a data storage device (PC).

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r