Suppressing Number Presentation - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Number Presentation (Outgoing)

Suppressing Number Presentation

2. In the list field at the top, select the group in question by its name or number.

3. In the Number presentation (outgoing) list field, select one of the following options:

No: The phone number is suppressed.

Standard: Both the DDI parallel to the internal number and the MSN on the

PTMP connection are displayed on the PTP connection over which the

subscriber is called (if the subscriber is not a member of the call distribution for

this connection, the first MSN is presented).

Exchange line dependent: The phone number to be presented is configured

separately for each external connection under Expert.

For the option No, the telephone service Calling Line Identification

Restriction (CLIR2) must be released by the network provider.

On a connection with a GSM gateway, the phone number presentation

configured in the PBX is not used because the actual phone number

presentation is directly configured in the individual GSM gateway.

On a connection with CLIP no screening enabled, the number presentation

defined here is not considered.

Suppressing Number Presentation

Also called number suppression. You can prevent the presentation of your own number to the

partner called (anonymous call). This feature allows you to decide before starting a call if the

number should be presented to the partner called or not. The number from your own

connection can still be transmitted to the network provider so that the charges can be calcu-

lated correctly.

For this function, the telephone service Calling Line Identification

Restriction (CLIR2) needs to be released by the network provider.

On ISDN telephones and system telephones Calling Line Identification

Restriction (CLIR) is done using a function key or menu (optional, see manual

for the telephone; this may also be known as identification suppressed).

Calling Line Identification Restriction (CLIR) is also possible on an analogue

T-Net telephone using the T-Net function key/men, if available (see manual

for the telephone; this may also be known as anonymous calling).

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r