Selecting A Provisioning File As Template - Auerswald COMpact 5000 Operation Manual

2. Select the Header file check box in the line of the header file in question.
3. Click Authorisations in the line of the header file in question.
4. Select the desired subscriber(s):
• To grant access to all subscribers:
Click
granted access).
or:
Select the Authorisation for all subscribers check box (all current and future
subscribers on the PBX are granted access).
• To grant access to all subscribers: Click
subscribers check box.
• To grant access to all subscribers to a group: Select a group in the Authorisation
for all subscribers to the group list field.
Note: The header file is a combination of several provisioning files. When
assigning the authorisations to the required subscribers, they must also get
the authorisations of all provisioning files which are part of the header file. For
this, it is recommendable to select the required files under Subscriber (scr.)
> IP provisioning > File management > Authorisations in the list field
Take over authorisations from.
5. Click Save.

Selecting a Provisioning File as Template

Proceed as follows:
• Using the configuration manager
1. Open the page Subscriber (scr.) > IP provisioning > File management.
2. In the line of the required provisioning file, select the as template check box.
3. Click Save.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
(only those subscribers that are currently registered on the PBX are
Service and Maintenance
Provisioning for IP Telephones
Selecting a Provisioning File as Template
.or select the Authorisation for all
785