Pick-Up; Performing Pick-Up - Auerswald COMpact 5000 Operation Manual

Functions

Pick-up

Performing Pick-up

Pick-up
Using Pick-up, you can take a call on your own phone that was originally sent to another
internal telephone.
If the call has already been taken, the call can be taken using same procedure if the call take-
over has been allowed by the subscriber being called. This function is useful, for example, in
the case of answering machines.
Performing Pick-up
Proceed as follows:
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Requirements:
• Authorisation Pick-up assigned to the subscriber
• To pick up an external call: Exchange line authorisation assigned to the subscriber for
incoming calls (International, National, City or only incoming, with emergency call)
If an internal telephone rings in your proximity, proceed as follows:
1. Pick up the receiver of your telephone.
2. Dial ##06.
3. Enter the internal number of the telephone that is ringing. Possible entries:
Internal number of the individual telephone
Direct exchange line telephone: with preceding **)
Internal number of the group
exchange line telephone: with preceding **)
You are connected with the caller.
440
(for exchange line request type Direct
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
(for exchange line request type