Assigning Profiles - Auerswald COMpact 5000 Operation Manual

Settings
Profiles

Assigning Profiles

Proceed as follows:
• Using the configuration manager
1. Open one of the following pages:
• Subscriber (scr.) > Profiles > Configuration
• Groups > Profiles > Configuration
• Devices > Voice mail/fax boxes > Profiles > Configuration
2. Click New.
3. In the Profile name entry field, enter the name of the profile.
4. In the Based on list field, select a template from all profiles created so far.
5. Click Save.
6. Repeat step 2 to 5 to create additional profiles.
Assigning Profiles
A configuration depending profile can be assigned to each subscriber, group or voice mail/fax
box.
If Assign profile to all is enabled, the same profile is assigned to all subcribers, groups or
boxes for one configuration.
If Assign profile to all is disabled, different profiles can be assigned to the subscribers, groups
or boxes.
Proceed as follows:
• Using the configuration manager
1. Open one of the following pages:
• Subscriber (scr.) > Profiles > Profile assignment
• Groups > Profiles > Profile assignment
• Devices > Voice mail/fax boxes > Profiles > Profile assignment
660
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016