Rate-Limit; Example #4 (Interface Config) Traffic-Shape; Example #5 Show Interfaces Cos-Queue Slot/Port - D-Link DES-3226L User Manual

The value is the percentage of port speed. For example, a value of 20 means the port
<0-100>
speed for egress traffic is at 20% of the maximum rate. The
absolute bandwidth value of the port in kilobits per second in increments of 64 kbps. The
default bandwidth value is 0, meaning no upper limit is enforced, which allows the interface to
transmit up to its maximum line rate.
The bandwidth value is independent of any per-queue maximum bandwidth value(s) in effect
for the interface and should be considered as a second-level transmission rate control
mechanism that regulates the output of the entire interface regardless of which queues
originate the outbound traffic.
Format
Modes

rate-limit

This command allows you to limit the rate of ingress traffic arriving on the port. You can set
the rate on a per-port basis or on all ports. The
to limit. For example, a value of 20 means that the port speed for ingress traffic is at 20% of
the maximum rate. The
increments of 64 kbps.
The default ingress rate shaping value is 0, meaning no upper limit is enforced, which allows
the port to accept up to its maximum traffic rate.
Default
Format
Modes
To verify the traffic-shape and rate limit values, from Privileged Exec mode enter:
show interfaces cos-queue
show interface cos-queue <slot/port>
interface.

Example #4 (Interface Config) traffic-shape

(Console) #config
(Console) (Config)#interface 0/1
(Console) (Interface 0/1)#traffic-shape 60
(Console) (Interface 0/1)#exit
(Console) (Config)#exit

Example #5 show interfaces cos-queue slot/port

(Console) #show interfaces cos-queue 0/1
Interface...................................... 0/1
Interface Rate Limit........................... 0 percent
Interface Shaping Rate......................... 60 percent
traffic-shape {<0-100> | rate <0-10000000>}
Global Config
Interface Config
<rate 0-10000000>
0
rate-limit {<0-100> | rate <0-10000000>}
Global Config
Interface Config
- shows traffic-shape value for all interfaces
Class of Service (CoS)
<rate 0-10000000>
value is the percentage of bandwidth
<0-100>
value is the absolute bandwidth value in
- shows traffic-shape value for the specified
65
is the