Procedure 22: Load The Application Software From Tape - Nortel Meridian Meridian 1 Maintenance Manual

Procedure 22: Load the application software from tape

Before loading the application tape (labeled Tape 2 of 2), ensure that you
reboot and go through setup as described in Procedure 21. This procedure
assumes you are at the ÒConsole Login:Ó prompt. If you have just
performed Procedure 21, you may see the Ò#Ó prompt; if so, skip steps 1
and 2 and go to step 3.
If you plan to use Ethernet, ensure that your module is connected to
a working Ethernet backbone.
1 At the ÒConsole Login:Ó prompt, type root and press [Return] to log
in as the root user.
2 At the ÒPasswordÓ prompt, press [Return].
3 At the root shell prompt Ò#Ó, type sysadm and press [Return].
Figure 122
System administration menu
1 diagnostics
2 diskmgmt
3 filemgmt
4 machinemgmt
5 packagemgmt
6 softwaremgmt
7 syssetup
8 ttymgmt
9 usermgmt
Enter a number, a name, the initial part of a name, or
? or <number>? for HELP,
4 At the system administration menu, type 6 and press [Return].
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 8: Recovery/replacement procedures 441
ATTENTION
SYSTEM ADMINISTRATION
system diagnostics menu
disk management menu
file management menu
machine management menu
package management menu
software management menu
system setup menu
tty management menu
user management menu
q to QUIT: