Nortel Meridian Meridian 1 Maintenance Manual page 359

2052
Log message
Parameters
Object, Function, Cause
6: Invalid Device ID was given
7: Invalid DN was given
8: Bad queuing priority was specified
9: Request failed on the MLS-1 for an unspecified reason
10: ACD queue is in Night Service. Call cannot be placed in a
queue that is in Night Service
11: Call was already placed in queue by a previous IVR request or
by a previous queue request
12: Call is not in specified queue
13: Call cannot be given busy tone, since it is an unanswered
non-ISDN-CO or Japan DID trunk call. The call has been sent to
the default ACD-DN.
14: An invalid Give IVR treatment was specified
15: The first command received for a call cannot be this treatment
16: Call originator is attendant and is not allowed to receive
IVR/RAN/MUSIC
17: Call originator is a no hold Conference and is not allowed to
receive IVR/RAN/MUSIC
18: Invalid RAN/MUSIC route
19: RAN or tone connection is blocked
Description
information being put into the request message.
This error implies there are call processing errors occurring.
Impact
Refer to the cause code in the error log message and fix the
Recovery
problem accordingly.
Meridian Link Release 5C/CCR Release 3C Diagnostic and Maintenance Guide
Chapter 7: CCR log file messages 347
Call treatment was not executed successfully
Script Name, Script Command, Parameter, Component,
The call command request was rejected due to incorrect