Messages That Appear On The System Console; System And Unix Messages - Nortel Meridian Meridian 1 Maintenance Manual

238 Chapter 5: Application Module and IPE Module error messages

Messages that appear on the system console

System and UNIX messages

Table 5
System and UNIX messages that appear on the console
Message
Putc: out of clists
PANIC: kernel bus error system
panic
553-3211-510 Standard 1.0 October 1998
Note: The use of single quotation marks in a message (included in
one of the tables in this chapter) indicates that either a command or
parameter specified by you or the system is being referenced in the
message.
Wherever possible, the description provides information to help you
recover from the error condition. Referenced procedures can be found in
Chapter 8, ÒRecovery/replacement procedures.Ó
The messages in this section appear directly on your system console.
The following list is a summary of the messages displayed by either the
system or the UNIX operating system. They may appear at any time, even
if you are logged in and using the system.
Description
WarningÑthe buffers used by terminal devices for I/O
have overflowed. Use Procedure 2: SBC restart.
UNIX took a bus error while running in system mode.
Record message and all activities on system. Use
Procedure 2: SBC restart.