66 Chapter 2: Application Module commands
printconfigÑconfigure printers
553-3211-510 Standard 1.0 October 1998
This command applies to CCR only.
The CCR application provides eight ports for printers and terminals.
However, IPE Modules can only use ports 7 and 8 for printers and
terminals. The ÒEnter PORT numberÓ prompt shows the port numbers of
available ports.
Note: If an IPE Module has port 6 configured for a terminal or
printer, this configuration will be deleted when CCR is installed
(Release 3C) or upgraded to Release 3C.
This command allows you to perform many functions related to printers,
including
¥
adding or deleting printers
¥
listing and getting the status of printers
¥
enabling or disabling printers
¥
listing or deleting print jobs
Example:
maint> printconfig
CCR Line Printer Configuration Utility
1:
Add a printer.
2:
Delete a printer.
3:
List of configured printers.
4:
Status of configured printers.
5:
Enable a configured printer.
6:
Disable a configured printer.
7:
List/Delete printer job.
Enter the number of the function you want to perform.
(Hit the <RETURN> key to EXIT)