Nortel Meridian Meridian 1 Maintenance Manual page 208

196 Chapter 4: Diagnosing faults
Diagnostic procedure 8
Application terminal problem (continued)
8.6
Are the terminalÕs
settings correct?
Does the
terminal test pass?
See the ÒTerminal
testÓ box.
Go to
8.7
553-3211-510 Standard 1.0 October 1998
This procedure applies to CCR only.
Verify and correct the
NO
settings. Refer to the
Meridian Link/Customer
Controlled Routing
Installation and Upgrade
Guide (553-3202-210).
YES
NO
Replace the terminal.
YES
Terminal test
1. Place the terminal into
LOCAL mode.
2. Type a random mixture
of letters.
If all the letters typed
appear on the screen,
the test passed.
3. Place the terminal into
ONLINE mode.