Nortel Meridian Meridian 1 Maintenance Manual page 366

354 Chapter 7: CCR log file messages
553-3211-510 Standard 1.0 October 1998
5016
Log message
User ID, Process ID, Action Type, Cause, and Procedure,
Parameters
Script Name, Process ID, Action type, Cause, and Procedure
User ID, Process ID, and Procedure
User ID, Process ID, Lock Type, and Procedure
Process ID, Action Type, Cause, and Procedure
The user session is not registered with the CCR system
Description
manager and is, therefore, an invalid user session. The message is
ignored.
There is no system impact.
Impact
Log out of the application and log back in.
Recovery
5017
Log message
User ID, Script Name, Process ID, Action Type, Cause,
Parameters
and Procedure
The user session cannot perform a write transaction with
Description
view access only. The message is ignored.
There is no system impact.
Impact
Log out and log back in to gain write access (if there is no
Recovery
other user already logged in with write access).
5018
Log message
Component, Object, Function, and CDN
Parameters
The request to change the CDN to controlled mode has
Description
timed out.
Calls cannot be controlled by that CDN.
Impact
Ensure that the CDN is configured on the Meridian 1.
Recovery
Remove the CDN from the Association Table if that CDN is not
configured.
User session is not registered: message ignored
User session has view access only: message ignored
Request to Change CDN to controlled mode timed out