Procedure 25: Enable Or Disable Ethernet Lan Support - Nortel Meridian Meridian 1 Maintenance Manual

460 Chapter 8: Recovery/replacement procedures

Procedure 25: Enable or disable Ethernet LAN support

553-3211-510 Standard 1.0 October 1998
Before you enable or disable Ethernet LAN support, ensure that all
applications have been stopped.
This procedure can be used to enable or disable Ethernet LAN support. The
example shown in the following procedure is for enabling the support.
1 Type maint and press [Return] at the ÒConsole Login:Ó prompt to
log in as the maintenance user.
2 You are prompted to enter a password. Type the password for the
maint account and press [Return]. The initial password for maint is
maint.
3 At the Òmaint>Ó prompt, type install and press [Return].
Figure 155
Tape prompt
You can reconfigure the system using a keycode without a tape or you can use a
tape to upgrade the software and reconfigure.
Do you want to use a tape (y/n/q)?
4 You are prompted to use a tape (Figure 155). Type n and press
[Return].
Figure 156
Meridian 1 ID prompt
Please enter the Meridian ID of this site:
(or Q or q to quit)
5 You are prompted to enter your Meridian 1 ID (Figure 156). Type
your ID and press [Return].