254 Chapter 5: Application Module and IPE Module error messages
Table 7
maint messages that appear on the console (continued)
Command
Message
printconfig
Printer name already exists
Must give a non-null string for the
name
Port already in use. Request
denied.
Invalid port number. Request
rejected.
Invalid printer model. Request
rejected.
Printer name doesnÕt exist
Please enter a valid number or
<Return>
quit
(no error messages)
resetmodem
(no error messages)
restart
(no error messages)
rootpasswd
(no error messages)
rstdata
Restore unsuccessful
553-3211-510 Standard 1.0 October 1998
Description
Two printers may have the same
name. Choose a different name for
the second printer.
The printer name must have one or
more characters.
Two printers cannot be configured
for the same port.
Valid port numbers are 1 through 8
for the CCR application.
Models are: 1) HP Rugged Writer,
2) HP LaserJet II, III, IV, and 3)
Other (Dumb)
Only printers added to the system
can be deleted, enabled, or disabled.
Select menu items by their
corresponding number (1 through 7).
The operation was not successful.
Use the viewlog command to search
for errors in the SysLog file. Verify
that the tape is positioned in the drive
correctly, and that it is write enabled.
Wait for the tape drive LED to go out
after inserting the tape before
executing the command.
Ñ continued Ñ